Ozgul LW4 EU FIX

�� Information in English: - - Additional options and accessories -

• Lifting axle

TECHNICAL SPECIFICATIONS - - MASSES & DIMENSIONS - -Gross Vehicle Weight (kg) : 70.000 - -Loading Platform Length (mm) : 9.000 - -Weight of Axle Group (kg) : 48.000 - -Total Lenght (mm) : 13.550 - -Kingpin Capacity (kg) :22.000 - -Total Width (mm) : 2.550 - -Curb Weight (kg) : 13.000 - -Loading Platform Height (mm) : 920 - -Pay Load (kg) : 57.000 - -Height of 5.th Wheel (mm) : 1.310 - - CONSTRUCTIONS - -Base Chassis - -Heavy duty and extra durability designed BOX type chassis All welded S355 steel chassis - -Outer frame is UPE 240 profile - -Welding (Chassis) : Automatic ARC submerged - -Welding (Superstructure) : Automatic robot welding - -Axle (Type) : Özkoç Trax or Osman Koç Turkish Brand - -Drum brakes 4 x 12 Ton axles - -Axle Lifting : 1st axle automatic 4th axle manuel lifting - -Suspension (Type) : Air Suspension - -Steering Axles : - - -King pin (Type) : 1 position with 1x coupling-pen 2” - -Tires : 16+1 Units, 245 / 70 R 17.5 - -Rims : 16+1 Units, 6.75 x 17.5 steel rims - -Landing Gear : Mechanical operated by one side, two speed - -Brake System : Wabco EBS (4S/3M) with RSS according to EC Directive with ADR Adaptation - -Brake Chamber - -2 axles with 4 units emergency brake chambers. - -2 axle with 4 units service brake chambers. - - Electric System - -24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA Brand - -2 x Rear Stop Lights. - 4 x Side LED Lights - -2 x White LED Lights - 2 x Front LED Lights - -2 x Registration Plate Lights - 2 x rotating Lights - - Floor - -Above tyres and edges of platform are covered chequered sheet and hard wood - -The middle surface is covered by flat sheet steel - - Rear Loading Ramps - -Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable - -push – button for remote control - -Folding type rear ramps length 2500 mm +1500 mm width 900 mm - -Rear ramps are sliding internal and external hydraulic - -Short steel ramps behind of neck. - - Paint Application - -Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint - - TECHNICAL SPECIFICATIONS ACCESSORIES - -2 x 8 pcs of heavy duty lashing rings mounted on the outer frame mushroom type - -4 x Certificated Expray mud flaps. - -1 x Plastic water tank - -2 x Wheel chocks and holders - -2 x 8 Galvanized sides extensions brackets 250 mm + 250 mm - -2 x Side Protections, Aluminium - -1 x Tool box. - -1 x spare Wheel carrier with 1 tire(on the gooseneck) - -2 x Manual support Legs at the rear. - -2 x Reflective tape and reflector sign at the rear and sides. - -2 x Side extensions reflector - -Steel front panel(height:400mm) - -Aluminum side panels on gooseneck section(height:400mm) - -1 plaque places on rear ramps or bumper

CE mark: yes - COC available: Yes

• Hubachse

TECHNICAL SPECIFICATIONS - - MASSES & DIMENSIONS - -Gross Vehicle Weight (kg) : 70.000 - -Loading Platform Length (mm) : 9.000 - -Weight of Axle Group (kg) : 48.000 - -Total Lenght (mm) : 13.550 - -Kingpin Capacity (kg) :22.000 - -Total Width (mm) : 2.550 - -Curb Weight (kg) : 13.000 - -Loading Platform Height (mm) : 920 - -Pay Load (kg) : 57.000 - -Height of 5.th Wheel (mm) : 1.310 - - CONSTRUCTIONS - -Base Chassis - -Heavy duty and extra durability designed BOX type chassis All welded S355 steel chassis - -Outer frame is UPE 240 profile - -Welding (Chassis) : Automatic ARC submerged - -Welding (Superstructure) : Automatic robot welding - -Axle (Type) : Özkoç Trax or Osman Koç Turkish Brand - -Drum brakes 4 x 12 Ton axles - -Axle Lifting : 1st axle automatic 4th axle manuel lifting - -Suspension (Type) : Air Suspension - -Steering Axles : - - -King pin (Type) : 1 position with 1x coupling-pen 2” - -Tires : 16+1 Units, 245 / 70 R 17.5 - -Rims : 16+1 Units, 6.75 x 17.5 steel rims - -Landing Gear : Mechanical operated by one side, two speed - -Brake System : Wabco EBS (4S/3M) with RSS according to EC Directive with ADR Adaptation - -Brake Chamber - -2 axles with 4 units emergency brake chambers. - -2 axle with 4 units service brake chambers. - - Electric System - -24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA Brand - -2 x Rear Stop Lights. - 4 x Side LED Lights - -2 x White LED Lights - 2 x Front LED Lights - -2 x Registration Plate Lights - 2 x rotating Lights - - Floor - -Above tyres and edges of platform are covered chequered sheet and hard wood - -The middle surface is covered by flat sheet steel - - Rear Loading Ramps - -Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable - -push – button for remote control - -Folding type rear ramps length 2500 mm +1500 mm width 900 mm - -Rear ramps are sliding internal and external hydraulic - -Short steel ramps behind of neck. - - Paint Application - -Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint - - TECHNICAL SPECIFICATIONS ACCESSORIES - -2 x 8 pcs of heavy duty lashing rings mounted on the outer frame mushroom type - -4 x Certificated Expray mud flaps. - -1 x Plastic water tank - -2 x Wheel chocks and holders - -2 x 8 Galvanized sides extensions brackets 250 mm + 250 mm - -2 x Side Protections, Aluminium - -1 x Tool box. - -1 x spare Wheel carrier with 1 tire(on the gooseneck) - -2 x Manual support Legs at the rear. - -2 x Reflective tape and reflector sign at the rear and sides. - -2 x Side extensions reflector - -Steel front panel(height:400mm) - -Aluminum side panels on gooseneck section(height:400mm) - -1 plaque places on rear ramps or bumper

CE-Kennzeichnung: ja

• Liftas

TECHNICAL SPECIFICATIONS - - MASSES & DIMENSIONS - -Gross Vehicle Weight (kg) : 70.000 - -Loading Platform Length (mm) : 9.000 - -Weight of Axle Group (kg) : 48.000 - -Total Lenght (mm) : 13.550 - -Kingpin Capacity (kg) :22.000 - -Total Width (mm) : 2.550 - -Curb Weight (kg) : 13.000 - -Loading Platform Height (mm) : 920 - -Pay Load (kg) : 57.000 - -Height of 5.th Wheel (mm) : 1.310 - - CONSTRUCTIONS - -Base Chassis - -Heavy duty and extra durability designed BOX type chassis All welded S355 steel chassis - -Outer frame is UPE 240 profile - -Welding (Chassis) : Automatic ARC submerged - -Welding (Superstructure) : Automatic robot welding - -Axle (Type) : Özkoç Trax or Osman Koç Turkish Brand - -Drum brakes 4 x 12 Ton axles - -Axle Lifting : 1st axle automatic 4th axle manuel lifting - -Suspension (Type) : Air Suspension - -Steering Axles : - - -King pin (Type) : 1 position with 1x coupling-pen 2” - -Tires : 16+1 Units, 245 / 70 R 17.5 - -Rims : 16+1 Units, 6.75 x 17.5 steel rims - -Landing Gear : Mechanical operated by one side, two speed - -Brake System : Wabco EBS (4S/3M) with RSS according to EC Directive with ADR Adaptation - -Brake Chamber - -2 axles with 4 units emergency brake chambers. - -2 axle with 4 units service brake chambers. - - Electric System - -24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA Brand - -2 x Rear Stop Lights. - 4 x Side LED Lights - -2 x White LED Lights - 2 x Front LED Lights - -2 x Registration Plate Lights - 2 x rotating Lights - - Floor - -Above tyres and edges of platform are covered chequered sheet and hard wood - -The middle surface is covered by flat sheet steel - - Rear Loading Ramps - -Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable - -push – button for remote control - -Folding type rear ramps length 2500 mm +1500 mm width 900 mm - -Rear ramps are sliding internal and external hydraulic - -Short steel ramps behind of neck. - - Paint Application - -Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint - - TECHNICAL SPECIFICATIONS ACCESSORIES - -2 x 8 pcs of heavy duty lashing rings mounted on the outer frame mushroom type - -4 x Certificated Expray mud flaps. - -1 x Plastic water tank - -2 x Wheel chocks and holders - -2 x 8 Galvanized sides extensions brackets 250 mm + 250 mm - -2 x Side Protections, Aluminium - -1 x Tool box. - -1 x spare Wheel carrier with 1 tire(on the gooseneck) - -2 x Manual support Legs at the rear. - -2 x Reflective tape and reflector sign at the rear and sides. - -2 x Side extensions reflector - -Steel front panel(height:400mm) - -Aluminum side panels on gooseneck section(height:400mm) - -1 plaque places on rear ramps or bumper

CE markering: ja - COC beschikbaar: Ja